The WINCHELSEA 2.2 (MkII) is a smaller version of the DIY Winchelsea 8 designed so the planks can be cut from a standard ply sheet and no need for scarfing. This new version has a flat keel plank instead of the plywood keel section which makes it easier to build. An optional keel can be added by attaching a length of timber to the bottom and adding a skeg. A very handy little boat carried easily on a roof rack of the average car. She will row, motor or sail and has plenty of room inside for a boat of this size.
The kit is marine plywood with a 6mm planked hull with 12mm transom and bulkheads. The bulkheads have the holes for the hatches pre-drilled (buoyancy tank option only). The hull is built using the "Clinker Plywood" method of construction over a simple build frame which quickly gives you the hull shape and then the laps are filled with epoxy.
Sorry, Currently Out of Stock
Available as a
Plywood Only Kit - £285.00
All the marine plywood planks, keel plank, transom, bulkheads (buoyancy tank option only) and seats pre-cut ready for assembly
Standard Kit - £595.00
All the marine plywood planks, transom, bulkheads and seats pre-cut ready for assembly
Epoxy resin, tape etc. required to build hull, timber trim and knees etc.
Plastic cable ties for stitches
Round watertight hatches
Full construction plans
Contact us now for a kit brochure.
Optional Extras;
Kit Delivery - £20.00
(UK Mainland Only)
Alloy Oars with black/white nylon rowlocks - £POA
Wooden Oars with black nylon rowlocks - £75.00
Wooden Oars with galvanised rowlocks - £85.00